D-Link DGS-3630 User Manual 1 - Page 104

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description support keywords that support hexadecimal values. Spaces not in the formatted key string will be ignored. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. DHCPv6 Relay Format Type Settings This window is used to display and configure the DHCPv6 relay format type settings. This is used to configure DHCPv6 relay Option 37 and Option 18 of the expert UDF string of each port. To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Format Type Settings, as shown below: Figure 4-63 DHCPv6 Relay Format Type Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port Type Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select the type here. Options to choose from are: • Remote ID - Specifies to configure the Expert UDF format type string for DHCPv6 Option 37. • Interface ID - Specifies to configure the Expert UDF format type string for DHCPv6 Option 18. Format Type Expert UDF Enter the format type expert UDF string that will be used on the specified port(s) here. Click the Apply button to accept the changes made. DHCPv6 Relay Port Settings This window is used to display and configure the DHCPv6 relay port settings. 92