D-Link DGS-3630 User Manual 1 - Page 307

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Metric Description Enter the metric value here. This value is used when redistributing other processes to an IPv6 OSPF process. The range is from 0 to 16777214. The default metric is value 20 when no metric value is specified. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Delete button to delete the specified entry. OSPFv3 Virtual Link Settings This window is used to display and configure the OSPFv3 virtual link settings. To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Virtual Link Settings, as shown below: Figure 6-80 OSPFv3 Virtual Link Settings Window The fields that can be configured in OSPFv3 Virtual Link are described below: Parameter Process ID Instance ID Area ID Router ID Hello Interval Dead Interval Description Enter the ID for an IPv6 OSPF routing process here. It is locally assigned and should be unique for each IPv6 OSPF routing process on the router. The range is from 1 to 65535. Select and enter the instance ID here. The range is from 0 to 255. Enter the OSPF area ID here. It can be specified as an IPv4 address. Enter the router ID here associated with the virtual link neighbor. Enter the Hello Interval value between the hello packets that the router sends on an interface here. The range is from 1 to 65535 seconds. Select the Default option to use the default value, which is 10 seconds. Enter the Dead Interval value, during which no packets are received and after which a neighbor is regarded as offline, here. The range is from 1 to 65535 seconds. Select the Default option to use the default value, which is 40 seconds. 295