D-Link DGS-3630 User Manual 1 - Page 414

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description • Level-2 - Specifies that routes learned by level 1 routing are summarized into the level 2 backbone with the configured prefix value. Redistributed routes into level-2 ISIS will be summarized also. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. ISIS Interface Settings This window is used to display and configure the ISIS interface settings. To view the following window, click L3 Features > ISIS > ISIS Interface Settings, as shown below: Figure 6-218 ISIS Interface Settings Window The fields that can be configured are described below: Parameter Interface VLAN IPv4 IPv6 Area Tag Description Enter the VLAN ID that will be used here. The range is from 1 to 4094. Select this option to enable the ISIS routing protocol for IPv4 on the interface. Select this option to enable the ISIS routing protocol for IPv6 on the interface. Enter the ISIS area tag here. This can be up to 16 characters long. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 402