D-Link DGS-3630 User Manual 1 - Page 439

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Rate Limit Description Select and enter the rate limit value here. • When Bandwidth is selected, enter the input/output bandwidth value used in the space provided. This value must be between 8 and 10000000 kbps. Also, enter the Burst Size value in the space provided. This value must be between 0 and 128000 kilobytes. • When Percent is selected, enter the input/output bandwidth percentage value used in the space provided. This value must be between 1 and 100 percent (%). Also, enter the Burst Size value in the space provided. This value must be between 0 and 128000 kilobytes. • Select the None option to remove the rate limit on the specified port(s). The specified limitation cannot exceed the maximum speed of the specified interface. For the ingress bandwidth limitation, the ingress will send a pause frame or a flow control frame when the received traffic exceeds the limitation. Click the Apply button to accept the changes made. Queue Rate Limiting This window is used to display and configure the queue rate limiting settings. To view the following window, click QoS > Basic Settings > Queue Rate Limiting, as shown below: Figure 7-6 Queue Rate Limiting Window The fields that can be configured are described below: Parameter Unit From Port - To Port Queue ID Rate Limit Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select the queue ID that will be configured here. Options to choose from are 0 to 7. Select and enter the queue rate limit settings here. • When the Min Bandwidth option is selected, enter the minimum bandwidth rate limit value in the space provided. This value must be between 8 and 10000000 kbps. Also enter the maximum bandwidth (Max 427