D-Link DGS-3630 User Manual 1 - Page 481

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Extended IPv6 ACL After selecting an Extended IPv6 ACL and clicking the Add Rule button, the following page will appear. Figure 8-14 Extended IPv6 ACL (Add Rule) Window The fields that can be configured are described below: Parameter Sequence No. Action Protocol Type Description Enter the sequence number of this ACL rule here. The range is from 1 to 65535. If this value is not specified, the system will automatically generate an ACL rule number for this entry. Select the action that this rule will take here. Options to choose from are Permit, Deny, and Deny CPU. Select the protocol type option here. Options to choose from are TCP, UDP, ICMP, Protocol ID, ESP (50), PCP (108), SCTP (132), and None. • Value - The protocol ID can also manually be entered here. The range is from 0 to 255. • Mask - After selecting the Protocol ID option, manually enter the protocol mask value here. The range is from 0x0 to 0xFF. • Fragments - Select this option to include packet fragment filtering. Source Select and enter the source IPv6 information here. Options to choose from are Any, Host, and IPv6. • When the Any option is selected, any source traffic will be evaluated according to the conditions of this rule. • When the Host option is selected, enter the source host IPv6 address here. • When the IPv6 option is selected, the Prefix Length option will also be available. Enter the source IPv6 address and prefix length value in the spaces provided. 469