D-Link DGS-3630 User Manual 1 - Page 336

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter RP Hash Description Enter the IPv4 multicast group address here. Click the Find button to display a list of access lists based on the selection made. Click the Show All button to display all configured access lists. PIM Register Settings This window is used to display and configure the PIM register settings. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM Register Settings, as shown below: Figure 6-117 PIM Register Settings Window The fields that can be configured in Register Checksum Wholepkt are described below: Parameter RP Address Access List Name Description Enter the standard access list that will be used here. Alternatively, click the Show List button to find and select any of the exiting access lists configured on this Switch to be used in this configuration. Click the Add button to add a new entry based on the information entered. Click the Delete button to delete an entry based on the information entered. The fields that can be configured in Register Probe Time are described below: Parameter Register Probe Description Enter the register probe time value here. The range is from 1 to 127 seconds. The register probe time is the time before the Register Stop Timer (RST) expires when a DR may send a Null-Register to the RP to cause it to resend a Register-Stop message. Select the Default option to use the default value, which is 5 seconds. Click the Apply button to accept the changes made. 324