D-Link DGS-3630 User Manual 1 - Page 270

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Click the Apply button to accept the changes made. The fields that can be configured in URPF Port Settings are described below: Parameter Unit From Port - To Port Reachable Via Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select the reachable via option here. Options to choose from are: • Any - Specifies to verify if the source address is present in the routing table (sometimes referred to as loose mode). • RX - Specifies to verify if the source address is present in the routing table and if the incoming interface matching the source is reachable through the interface on which the packet was received (sometimes referred to as strict mode). Allow Default Select the allow default option here. Options to choose from are: • True - Specifies the use of the default route for Unicast RPF verification. • False - Specifies not to use the default route for Unicast RPF verification. IP Access List Name IPv6 Access List Name Enter the name of the IP access list that will be used in the URPF check here. This string can be up to 32 characters long. Enter the name of the IPv6 access list that will be used in the URPF check here. This string can be up to 32 characters long. Click the Apply button to accept the changes made. VRF VRF Settings This window is used to display and configure the Virtual Routing and Forwarding (VRF) settings. To view the following window, click L3 Features > VRF > VRF Settings, as shown below: Figure 6-36 VRF Settings Window The fields that can be configured are described below: Parameter VRF Name Description Enter the name of the VRF instance here. This name can be up to 12 characters long. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to display all the available entries. 258