D-Link DGS-3630 User Manual 1 - Page 377

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L3 Features > BGP > BGP Dampening Settings, as shown below: Figure 6-171 BGP Dampening Settings Window The fields that can be configured in BGP Dampening are described below: Parameter Address Family Description Select the address family that will be used here. Options to choose from are: • IPv4 Unicast - Specifies to use the IPv4 unicast address family in this configuration. • IPv4 VRF - Specifies to use a VRF instance in this configuration. Enter the name of the VRF instance in the space provided or click the Please Select button to select a pre-configured VRF instance that will be used here. This name can be up to 12 characters long. • IPv4 Multicast - Specifies to use the IPv4 multicast address family in this configuration. • IPv6 Unicast - Specifies to use the IPv6 unicast address family in this configuration. The fields that can be configured in BGP Dampening State are described below: Parameter Dampening State Description Select to enable or disable the BGP dampening state here. Click the Apply button to accept the changes made. The fields that can be configured in BGP Dampening Route Map are described below: Parameter Description BGP Dampening Route Map Enter the BGP dampening route map name here. This name can be up to 16 characters long Click the Apply button to accept the changes made. The fields that can be configured in BGP Dampening Settings are described below: Parameter Half Life Time Description Enter the half-life time value here. This specifies the time after which the accumulated penalty of the route is decreased by half. The range is from 1 to 45 minutes. 365