D-Link DGS-3630 User Manual 1 - Page 412

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 6-215 ISIS Router Settings (IPv6) Window The fields that can be configured are described below: Parameter Protocol Area Tag Adjacency Check Default Information Originate Distance Description Select the protocol that will be used here. Options to choose from are IPv4 and IPv6. Enter the ISIS area tag here. This specifies the tag of a routing process in which the IP interface is enabled. This can be up to 16 characters long. Select to enable or disable the adjacency check feature here. ISIS performs consistency checks on hello packets and forms an adjacency only with a neighboring router that supports the same set of protocols. This is used to enable or disable the check. Select to enable or disable the default information originate feature here. If this enabled, ISIS will generate an advertisement for default routes in its Level-2 Link-State Packets (LSPs). Enter the distance value here. This is used to define the administrative distance of ISIS routes. The range is from 1 to 255 for IPv4 ISIS routes and 1 to 254 for IPv6 ISIS routes. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Summary Address List button to view and configure the summary address list settings. Click the Summary Prefix List button to view and configure the summary prefix list settings. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Summary Address List button, the following page will appear. Figure 6-216 ISIS Router Settings (Summary Address List) Window 400