D-Link DGS-3630 User Manual 1 - Page 398

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Neighbor Unsupress Map Action Unsupress Map Name Route Map Type Description Select and enter the BGP neighbor here. Options to choose from are: • IPv4 Address - Enter the IPv4 address of the BGP neighbor here. • Peer Group - Enter the name of the peer group of the BGP neighbor here. This name can be up to 16 characters long. • IPv6 Address - Enter the IPv6 address of the BGP neighbor here. Select the unsuppress action that will be taken here. This is used to selectively advertise routes that were previously suppressed by the aggregate address feature. Options to choose from are Add and Delete. Enter the name of the route map that will be unsuppressed here. This name can be up to 16 characters long. Select the route map type here. Options to choose from are: • In - Specifies a route map that was applied to paths advertised from the neighbor. • Out - Specifies a route map that was applied to the paths advertised to the neighbor. Route Map Action Route Map Name Select the route map action here. Options to choose from are Add and Delete. Enter the name of the route map here. This name can be up to 16 characters long. Click the Apply button to accept the changes made. After clicking the Please Select button, the following page will appear. Figure 6-199 Neighbor Map Settings (Please Select) Window Select the VRF entry and click the OK button to use the selected VRF entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Neighbor Filter Settings This window is used to display and configure the BGP neighbor filter settings. 386