D-Link DGS-3630 User Manual 1 - Page 633

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured for VLAN Mode Settings are described below: Parameter VLAN Mode Description Select the VLAN mode of the VPLS here. The VLAN mode will affect the VLAN handling of the encapsulated packet for all PWs that belong to this VPLS. Options to choose from are: • No Change - Specifies not to change the VLAN tag on the ingress packet. This can only be applied on Ethernet VLAN-based ACs. • Add VLAN - Specifies to add the configured VLAN tag to the ingress packet. The default action for port-based ACs is to add the VLAN ID of 0. This can be applied on both Ethernet-based and Ethernet VLAN-based ACs. • Change VLAN - Specifies to change the VLAN tag of the ingress packet to the configured VLAN ID. This can only be applied on Ethernet VLANbased ACs. Select the None option to use the default setting. Click the Apply button to accept the changes made. The fields that can be configured for Egress VLAN Mode Settings are described below: Parameter Egress VLAN Mode Description Select the egress VLAN mode of the VPLS here. The egress VLAN mode will affect the outer VLAN tag handling before the decapsulated packet egress on ACs belonging to this VPLS. Options to choose from are: • Strip - Specifies that the outer-tag of the packet will be stripped before egress on the AC. • Change VLAN - Specifies that the outer-tag of the packet will be changed to the VLAN ID of the AC before egress on the AC. This can only be applied on Ethernet VLAN-based ACs. Select the None option to use the default setting. Click the Apply button to accept the changes made. After clicking the Show Detail button, the following page will appear. Figure 12-7 VPLS Settings (Show Detail) Window Click the Show Detail link to vie more detailed information about the topic. Click the Back button to return to the previous window. 621