D-Link DGS-3630 User Manual 1 - Page 411

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After clicking the NET List button, the following page will appear. Figure 6-213 ISIS Global Settings (NET List) Window The fields that can be configured are described below: Parameter NET Description Enter the NET Network Services Access Point (NSAP) address here. An Intermediate System (IS) is identified by an address known as the NSAP. The NSAP is divided up into three parts as specified by ISO 10589. A NET is an NSAP where the last byte is always the n-selector and is always zero. A NET can be from 8 to 20 bytes in length. Multiple NETs can be configured to merge or split areas. This implementation is just for IP routing only, so the NET must be configured to define the system ID and area ID. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. ISIS Router Settings This window is used to display and configure the ISIS router settings. To view the following window, click L3 Features > ISIS > ISIS Router Settings, as shown below: Figure 6-214 ISIS Router Settings (IPv4) Window 399