D-Link DGS-3630 User Manual 1 - Page 428

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description • Half Life Time - Enter the half-life time value here after which the penalty of the reachable routes is decreased by half. The range is from 1 to 45 minutes. • Reuse Value - Enter the re-use value here. This specifies that if the penalty of a route is lower than this value, the route is unsuppressed. The range is 1 to 20000. • Suppress Value - Enter the suppress value here. This specifies that if the penalty of a route is higher than this value, the route is suppressed. The range is from 1 to 20000. • Max Suppress Time - Enter the maximum suppress time value here that a route can be suppressed. The range is from 1 to 255 minutes. • Unreachable Route's Half Life - Enter the unreachability half-life time value here after which the penalty of the unreachable routes is decreased by half. The range is from 1 to 45 minutes. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. Policy Route This window is used to display and configure the policy route settings. To view the following window, click L3 Features > Policy Route, as shown below: Figure 6-233 Policy Route Window The fields that can be configured are described below: Parameter Type Description Select the policy route type here. Options to choose from are IP Policy and IPv6 Policy. Click the Edit button to modify the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 416