D-Link DGS-3630 User Manual 1 - Page 413
Summary Address, Level-1, Apply, Delete, Summary Prefix List
View all D-Link DGS-3630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 413 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Summary Address Description Select the level and enter the summary addresses here. This is used to create aggregate addresses for ISIS. Multiple groups of addresses can be summarized for a given level. Routes learned from other routing protocols can also be summarized. The metric used to advertise the summary is the smallest metric of all the more specific routes. This command helps reduce the size of the routing table. This command also reduces the size of the link-state packets (LSPs) and thus the link-state database (LSDB). It also helps network stability because a summary advertisement is depending on many more specific routes. A single route flap does not cause the summary advertisement to flap in most cases. The drawback of summary addresses is that other routes might have less information to calculate the most optimal routing table for all individual destinations. Levels to choose from are: • Level-1 - Specifies that only routes redistributed into level 1 are summarized with the configured IP address and mask value. • Level-1-2 - Specifies that summary routes are applied when redistributing routes into level 1 and level 2 ISIS and when level 2 ISIS advertises level 1 routes as reachable in its area. • Level-2 - Specifies that routes learned by level 1 routing are summarized into the level 2 backbone with the configured IP address and mask value. Redistributed routes into level-2 ISIS will be summarized also. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Summary Prefix List button, the following page will appear. Figure 6-217 ISIS Router Settings (Summary Prefix List) Window The fields that can be configured are described below: Parameter Summary Prefix Description Select the level and enter the summary prefix here. Levels to choose from are: • Level-1 - Specifies that only routes redistributed into level 1 are summarized with the configured prefix value. • Level-1-2 - Specifies that summary routes are applied when redistributing routes into level 1 and level 2 ISIS and when level 2 ISIS advertises level 1 routes as reachable in its area. 401