D-Link DGS-3630 User Manual 1 - Page 265

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Route Preference This window is used to display and configure the route preference settings. Use this window to configure the distance, which represents the route's trust rating. The route with a lower distance value is preferred over the route with a higher distance value. To view the following window, click L3 Features > Route Preference, as shown below: Figure 6-29 Route Preference Window The fields that can be configured are described below: Parameter VRF Name Distance Default Distance Static Description Enter the name of the VRF instance here. This name can be up to 12 characters long. Click the Please Select button to select a pre-configured VRF instance that will be used here. Enter the administrative distance of default routes here. The range is from 1 to 255. By default, this value is 1. Enter the administrative distance of static routes here. The range is from 1 to 255. By default, this value is 60. Click the Apply button to accept the changes made. After clicking the Please Select button, the following page will appear. Figure 6-30 Route Preference (Please Select) Window Select the VRF entry and click the OK button to use the selected VRF entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. ECMP Settings This window is used to display and configure the Equal-Cost Multi-Path (ECMP) routing settings. This is used to configure the load balancing hash algorithm and used to determine the next hop entry for multiple paths destined for the same destination. 253