D-Link DGS-3630 User Manual 1 - Page 531

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Unit From Port - To Port State Validation Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select to enable or disable the IPSG's state for the specified port(s) here. Select the validation method used here. Options to choose from are IP and IPMAC. Selecting IP means that the IP address of the received packets will be checked. Selecting IP-MAC means that the IP address and the MAC address of the received packets will be checked. Click the Apply button to accept the changes made. IP Source Guard VLAN Settings This window is used to display and configure the IPSG VLAN settings. To view the following window, click Security > IMPB > IPv4 > IP Source Guard > IP Source Guard VLAN Settings, as shown below: Figure 9-52 IP Source Guard VLAN Settings Window The fields that can be configured are described below: Parameter VID List State Validation Description Enter the VLAN ID list here. Select to enable or disable IPSG on the specified VLAN(s). Select the validation method here. Options to choose from are: • IP - Specifies to check the IP address in the received IP packet. • IP-MAC - Specifies to check the IP address and the MAC address in the received IP packet. Click the Apply button to accept the changes made. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. IP Source Guard Binding This window is used to display and configure the IPSG binding settings. 519