D-Link DGS-3630 User Manual 1 - Page 366

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L3 Features > IP Multicast Routing Protocol > IPv6MC > IPv6 Multicast Global Settings, as shown below: Figure 6-157 IPv6 Multicast Global Settings Window The fields that can be configured in IPv6 Multicast Routing are described below: Parameter IPv6 Multicast Routing Global State Description Select to globally enable or disable the IPv6 multicast routing feature here. When IPv6 multicast routing is disabled, the system will stop routing multicast packets even though the multicast routing protocol is enabled. Click the Apply button to accept the changes made. The fields that can be configured in IPv6 Multicast Interface Table are described below: Parameter Interface Name Description Enter the VLAN interface name that will be used here. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to display all the entries. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. IPv6 Static Multicast Route Settings This window is used to display and configure the IPv6 static multicast route settings. The PIM protocol does not have its own routing table but uses the unicast routing table to determine the reverse path forwarding interface to reach a network. This window is used to configure static multicast route to specify the RPF address for a network. To view the following window, click L3 Features > IP Multicast Routing Protocol > IPv6MC > IPv6 Static Multicast Route Settings, as shown below: Figure 6-158 IPv6 Static Multicast Route Settings Window 354