D-Link DGS-3630 User Manual 1 - Page 308

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Transmit Delay Retransmit Interval Description Enter the transmit delay value here that the router uses to wait before it transmits a packet. The range is from 1 to 65535 seconds. Select the Default option to use the default value, which is 1 second. Enter the retransmit interval value here that the router uses to wait before it retransmits a packet. The range is from 1 to 65535 seconds. Select the Default option to use the default value, which is 5 seconds. Click the Apply button to accept the changes made. The fields that can be configured in OSPF Virtual Link Table are described below: Parameter Process ID Description Enter the ID for an IPv6 OSPF routing process here. The range is from 1 to 65535. Click the Find button to locate a specific entry based on the information entered. Click the Process ID link (1) to access and configure the specified OSPFv3 process. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Process ID link (1), the following page will appear. Figure 6-81 OSPFv3 Virtual Link Settings (Process ID) Window Click the OK button to close the window and return to the previous window. OSPFv3 LSDB Table This window is used to find and display the OSPFv3 LSDB information. 296