D-Link DGS-3630 User Manual 1 - Page 636

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide 13. Monitoring VLAN Counter Utilization Statistics Mirror Settings sFlow Device Environment External Alarm Settings VLAN Counter This window is used to display and configure the VLAN counter settings. This is used to create a control entry for traffic statistics on specified Layer 2 VLAN interface(s). To view the following window, click Monitoring > VLAN Counter, as shown below: Figure 13-1 VLAN Counter Window The fields that can be configured for VLAN Counter Settings are described below: Parameter Interface VLAN Unit From Port - To Port Frame Type Description Enter the VLAN ID that will be used here. The range is from 1 to 4094. Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select the All option to use all the ports in this configuration. Select the frame type here. Options to choose from are: • Broadcast - Specifies to count only broadcast frames. • Multicast - Specifies to count only multicast frames. • Unicast - Specifies to count only unicast frames. • Any - Specifies to count all frames regardless of the frame type. • All - Specifies to count the four frame types mentioned above. Traffic Direction Select the traffic direction here. Options to choose from are: • RX - Specifies to count ingress traffic. • TX - Specifies to count egress traffic. • Both - Specifies to count ingress and egress traffic. Click the Apply button to accept the changes made. 624