D-Link DGS-3630 User Manual 1 - Page 315

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L3 Features > IP Multicast Routing Protocol > IGMP > IGMP SSM Mapping Settings, as shown below: Figure 6-91 IGMP SSM Mapping Settings Window The fields that can be configured in IGMP SSM Mapping Settings are described below: Parameter SSM Mapping State Description Select to enable or disable the SSM mapping feature for IGMPv1 or IGMPv2 hosts. Click the Apply button to accept the changes made. The fields that can be configured in Add Static SSM Mapping are described below: Parameter Source Address ACL Name Description Enter the source address to be associated with the group defined in the access list here. Enter the standard IP access list name that contains the multicast groups to be mapped. To permit a group, specify 'any' in source address field and specify the group address in destination address field of the access list entry. Alternatively, click the Please Select button to find and select any of the exiting access lists configured on this Switch to be used in this configuration. Click the Apply button to accept the changes made. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. The fields that can be configured in IGMP SSM Mapping Table are described below: Parameter Group Address Description Enter the IGMP multicast group address here. Click the Find button to locate a specific entry based on the information entered. 303