D-Link DGS-3630 User Manual 1 - Page 334

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Click the Show All button to display all configured access lists. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Click the Apply button to use the selected access list. PIM RP Candidate This window is used to display and configure the PIM RP candidate settings. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM RP Candidate, as shown below: Figure 6-114 PIM RP Candidate Window The fields that can be configured in RP Candidate Global Settings are described below: Parameter Priority Interval Wildcard Prefix Count Description Enter the candidate RP's priority value here. The range is from 0 to 255. Select the Default option to use the default value, which is 192. Enter the candidate RP's advertisement interval value here. The range is from 1 to 16383 seconds. Select the Default option to use the default value, which is 60 seconds. Enter the multicast group address wildcard (224.0.0.0/4) prefix count value in the C-RP message here. This value can either be 1 or 0. Select the Default option to use the default value, which is 0. Click the Apply button to accept the changes made. The fields that can be configured in RP Candidate Settings are described below: Parameter Interface Name Group Access List Name Description Enter the name of the interface here. Enter the standard access list that will be used here. Alternatively, click the Show List button to find and select any of the exiting access lists configured on this Switch to be used in this configuration. Select the All Groups option to map the candidate RP to all multicast groups. 322