D-Link DGS-3630 User Manual 1 - Page 149

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L2 Features > FDB > MAC Notification, as shown below: Figure 5-7 MAC Notification (MAC Notification Settings) Window The fields that can be configured are described below: Parameter Description MAC Address Notification Select to enable or disable MAC notification globally on the Switch Interval Enter the time value between notifications. This value must be between 1 and 2147483647 seconds. By default, this value is 1 second. History Size Enter the maximum number of entries listed in the history log used for notification. This value must be between 0 and 500. By default, this value is 1. MAC Notification Trap State Select to enable or disable the MAC notification trap state. Trap Type Select the trap type here. Options to choose from are: • Without VID - Specifies the trap information without the VLAN ID. • With VID - Specifies the trap information with the VLAN ID. Unit From Port - To Port Added Trap Removed Trap Select the stacking unit ID of the Switch that will be configured here. Select the range of ports that will be used for this configuration here. Select to enable or disable the added trap for the port(s) selected. Select to enable or disable the removed trap for the port(s) selected. Click the Apply button to accept the changes made for each individual section. After selecting the MAC Notification History tab, at the top of the page, the following page will be available. Figure 5-8 MAC Notification (MAC Notification History) Window 137