D-Link DGS-3630 User Manual 1 - Page 607

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide 11. MPLS MPLS LDP Information Settings MPLS LSP Trigger Information MPLS Forwarding Settings MPLS LDP Neighbor Password Settings MPLS LDP Neighbor Targeted Settings MPLS LDP Neighbor Information MPLS Global Settings MPLS LDP Interface Settings MPLS LDP Session Information MPLS LDP Statistic MPLS LDP Binding Table MPLS LDP Discovery Information MPLS QoS Settings Ping MPLS Traceroute MPLS IPv4 MPLS LDP Information Settings This window is used to display and configure the Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP) information settings. To view the following window, click MPLS > MPLS LDP Information Settings, as shown below: Figure 11-1 MPLS LDP Information Settings Window The fields that can be configured are described below: Parameter LSR ID LDP Version LDP State TCP Port Description Enter the Label Switching Router (LSR) ID here. The IPv4 address must be an IPv4 address of an existing interface. The LSR ID is used to identify the LSR in the MPLS network. Select the Default option to use the default setting. In this field the LDP version will be displayed. Select to enable or disable the LDP feature here. In this field the LDP TCP port number will be displayed. 595