D-Link DGS-3630 User Manual 1 - Page 31

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > PoE > PoE Configuration, as shown below: Figure 3-15 PoE Configuration Window The fields that can be configured for PoE Configuration are described below: Parameter Unit From Port - To Port Priority Legacy Support Mode Max Wattage Time Range Description Select the stacking unit ID of the Switch that will be configured here. Select the appropriate port range used for the configuration here. Select the priority for provisioning power to the port. Options to choose from are Critical, High and Low. Select this option to enable or disable the support of legacy PD. Select the power management mode for the PoE ports. Options to choose from are Auto and Never. When selecting Auto in the Mode drop-down list, this option appears. Tick the check box and enter the maximum wattage of power that can be provisioned to the auto-detected PD. If the value is not entered, the class of the PD automatically determines the maximum wattage which can be provisioned. The valid range for maximum wattage is between 1000 mW and 30000 mW. When selecting Auto in the Mode drop-down list, this option appears. Tick the check box and enter the name of the time range to determine the activation period. Click the Apply button to accept the changes made. Click the Delete Time Range button remove the time range association for the entry. PD Alive This window is used to display and configure the PoE PD alive settings. The PoE alive feature provides the solution when PD devices stop working or are not responding using the ping mechanism. 19