D-Link DGS-3630 User Manual 1 - Page 238

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Capabilities Inventory Network Policy PSE Description Select this option to enable or disable transmitting the LLDP-MED capabilities TLV. Select this option to enable or disable transmitting the LLDP-MED inventory management TLV. Select this option to enable or disable transmitting the LLDP-MED network policy TLV. Select this option to enable or disable transmitting the LLDP-MED extended power via MDI TLV, if the local device is PSE device or PD device. Click the Apply button to accept the changes made. LLDP-DCBX Port Settings The LLDP-DCBX Port Settings page is used to enable or disable outbound LLDP advertisements for Data Center Bridging Exchange protocol (DCBX) TLVs. To view the following window, click L2 Features > LLDP > LLDP-DCBX Port Settings, as shown below: Figure 5-105 LLDP-DCBX Port Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port Priority-based Flow Control Configuration TLV Description Select the Switch unit ID that will be used here. Select the Switch port range that will be used here. Select to enable or disable the Priority-based Flow Control (PFC) configuration TLV feature here. This specifies the PFC Configuration TLV to be sent. The PFC TLV is an optional TLV that allows a bridge port to advertise the current operational state and willing bit of the PFC. Click the Apply button to accept the changes made. LLDP Statistics Information This window is used to view the neighbor detection activity, LLDP Statistics and the settings for individual ports on the Switch. 226