D-Link DGS-3630 User Manual 1 - Page 610

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Click the Apply button to accept the changes made. MPLS LSP Trigger Information This window is used to display and configure the MPLS Label-Switched Path (LSP) trigger information. The LSP trigger filter rules are IP access list rules that it is used to control the IP routes that can be used to trigger the establishment of an LSP. To view the following window, click MPLS > MPLS LSP Trigger Information, as shown below: Figure 11-2 MPLS LSP Trigger Information Window The fields that can be configured are described below: Parameter SN Action Description Enter the sequence number of the LSP trigger filter rule here. When creating a new rule, if not specified, the SN begins from 10 and is incremented by 10. The range is from 1 to 10000. Select the action that will be taken here. Options to choose from are: • Permit - Specifies to permit LDP in establishing the LSP to follow the IP prefix FEC. • Deny - Specifies no permit LDP in establishing the LSP to follow the IP prefix FEC. IP Address Mask Enter the IPv4 address FEC on which the rule will apply. Enter the subnet mask FEC on which the rule will apply. Selecting the Any option specifies that the rule will apply on any IP prefix FEC. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Clear All button to clear all the information related to the SN entered. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MPLS Forwarding Settings This window is used to display and configure the MPLS forwarding settings. The Static FTN Settings section is used to add or delete a static FEC-To-NHLFE Map (FTN) entry. FEC stands form Forwarding Equivalence Class and NHLFE stands for Next Hop Label Forwarding Entry. At the ingress Label Edge 598