D-Link DGS-3630 User Manual 1 - Page 606

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click OAM > DDM > DDM RX Power Threshold Settings, as shown below: Figure 10-32 DDM RX Power Threshold Settings Window The fields that can be configured are described below: Parameter Unit Port Action Type Power Unit Value Description Select the Switch unit that will be used for this configuration here. Select the port used for the configuration here. Select the action that will be taken here. Options to choose from are Add and Delete. Select the type of RX power threshold. Options to choose from are Low Alarm, Low Warning, High Alarm, and High Warning. Select the power unit here. Options to choose from are mW and dBm. Enter the threshold value either in mW or dBm here. • When selecting mW in the Power Unit drop-down list, this value must be between 0 and 6.5535. • When selecting dBm in the Power Unit drop-down list, this value must be between -40 and 8.1647. Click the Apply button to accept the changes made. DDM Status Table This window is used to display the current operating digital diagnostic monitoring parameters and their values on the SFP module for specified ports. To view the following window, click OAM > DDM > DDM Status Table, as shown below: Figure 10-33 DDM Status Table Window 594