D-Link DGS-3630 User Manual 1 - Page 29

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > PoE > PoE System, as shown below: Figure 3-12 PoE System Window The fields that can be configured for PoE System are described below: Parameter Unit Usage Threshold Policy Preempt Trap State Description Select the stacking unit ID of the Switch that will be configured here. Enter the usage threshold to generate a log and send the corresponding standard notification. The range is from 1 to 99 percent. Select this option to enable or disable the disconnection of the Powered Device (PD) which is power-provisioned with a lower priority in order to release the power to the new connected PD with higher priority under power shortage conditions. Select this option to enable or disable the sending of PoE trap notifications. Click the Apply button to accept the changes made. Click the Show Detail button to see the PoE system Parameters table at the bottom of the window. After clicking the Show Detail button, the following window will appear. Figure 3-13 PoE System (Show Detail) Window PoE Status This window is used to configure the description and display the PoE status of each port. 17