D-Link DGS-3630 User Manual 1 - Page 277

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After clicking the Show Detail button, the following page will appear. Figure 6-44 RIP Distribute List (Show Detail) Window Click the Back button to return to the previous window. RIP Interface Settings This window is used to display and configure the RIP interface settings. To view the following window, click L3 Features > RIP > RIP Interface Settings, as shown below: Figure 6-45 RIP Interface Settings Window The fields that can be configured are described below: Parameter VRF Name Network Passive Interface BFD State Description Enter the name of the VRF instance here. This name can be up to 12 characters long. Enter the IPv4 network address used by RIP here. Interfaces that have a subnet belonging to the network specified here will be activated for RIP. Select to enable or disable the passive interface feature here. This feature is used to disable the sending and receiving of routing updates on an interface. However, RIP packets from other routers received on this interface will continue to be processed. Enter the name of the passive interface in the space provided. This name can be up to 12 characters long. Select the Default option to use this as the default for all interfaces. Select to enable or disable the BFD feature on the specified interface. When BFD is enabled on an interface, the router creates BFD peers with the current RIP peers of the interface, and BFD peers will be created when new RIP peers are added. If an RIP peer is removed because RIP is disabled, the related BFD peer will be removed. When the BFD session goes down, the RIP routes learned from the peer will be deleted. Click the Apply button to accept the changes made. 265