D-Link DGS-3630 User Manual 1 - Page 559

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description • Selecting MAC-WAC specifies to verify MAC-based authentication first. If the client passes, WAC will be verified next. Both authentication methods need to be passed. Max Users Periodic ReAuth Timer Inactivity State Inactivity Timer Restart Enter the maximum users value used here. This value must be between 1 and 4094. Select to enable or disable periodic re-authentication for the selected port here. This parameter only affects the 802.1X protocol. Enter the re-authentication timer value here. This value must be between 1 and 65535 seconds. By default, this value is 3600 seconds. Select to enable or disable the inactivity state here. When the Inactivity State is enabled, enter the inactivity timer value here. This value must be between 120 and 65535 seconds. This parameter only affects the WAC authentication protocol. Enter the restart time value used here. This value must be between 1 and 65535 seconds. Click the Apply button to accept the changes made. Network Access Authentication Sessions Information This window is used to view and clear the network access authentication session information. To view the following window, click Security > Network Access Authentication > Network Access Authentication Sessions Information, as shown below: Figure 9-82 Network Access Authentication Sessions Information Window The fields that can be configured are described below: Parameter Port MAC Address Protocol Description Select the appropriate Switch unit and port used for the query here. Enter the MAC address used here. Select the protocol option used here. Options to choose from are MAC, WAC, and DOT1X. Click the Clear by Port button to the clear the information based on the port selected. Click the Clear by MAC button to the clear the information based on the MAC address entered. 547