D-Link DGS-3630 User Manual 1 - Page 665

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Destination File Description Enter the destination filename and path of the firmware file to be backed up to the RCP server here. This field can be up to 64 characters long. Click the Backup button to initiate the firmware backup. Firmware Backup to SFTP This window is used to initiate a firmware backup to an SFTP server. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to SFTP, as shown below: Figure 15-11 Firmware Backup to SFTP Window The fields that can be configured are described below: Parameter Unit SFTP Server IP User Name Password VRF Name Source File Destination File Description Select the Switch unit that will be used for this configuration here. Enter the IPv4 address of the SFTP server here. Enter the user name used for the SFTP connection here. This name can be up to 32 characters long. Enter the password used for the SFTP connection here. This password can be up to 15 characters long. Enter the name of the VRF instance here. This name can be up to 12 characters long. Enter the source filename and path of the firmware file located on the Switch here. This field can be up to 64 characters long. Enter the destination filename and path of the firmware file to be backed up to the SFTP server here. This field can be up to 64 characters long. Click the Backup button to initiate the firmware backup. Configuration Restore & Backup Configuration Restore from HTTP This window is used to initiate a configuration restore from a local PC using HTTP. 653