D-Link DGS-3630 User Manual 1 - Page 275

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After clicking the Edit button, the following page will appear. Figure 6-42 RIP Settings (Edit) Window Click the Back button to return to the previous window. The fields that can be configured in Redistribution Configuration are described below: Parameter Redistribution Description • First, select to enable or disable the RIP redistribution feature here. • Second, select the routing protocol (domain) that will be redistributed into RIP. Options to choose from are BGP, Connected, OSPF, Static, and ISIS. The Static option means redistribute IP static routes. The Connected option refers to routes that are established automatically through configuring an IP address on an interface. • Third, enter the value to be used as the metric for the redistributed route here. The range is from 0 to 16. • Fourth, enter the Route Map name that is used in the filtering of the routes to be redistributed to the current routing protocol. If not specified, all routes are redistributed. Click the Apply button to accept the changes made. The fields that can be configured in RIP Configuration are described below: Parameter Update Time Invalid Time Description Enter the update interval in seconds at which the update message is sent. The range is from 1 to 65535 seconds. Select the Default option to use the default value here which is 30 seconds. Enter the invalid time value in seconds here. The range is from 1 to 65535 seconds. Select the Default option to use the default value here which is 180 seconds. 263