D-Link DGS-3630 User Manual 1 - Page 622

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After clicking the Add button, the following page will appear. Figure 11-21 MPLS QoS Settings (Edit, Outbound CoS to EXP Settings, Add) Window The fields that can be configured are described below: Parameter EXP Description Select the EXPs (on the right) to be mapped to CoS values (on the left) here. This feature is used to configure the class EXP to CoS mapping of the policy. The range is from 0 to 7. Select the Default option to use the default value. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. After clicking the Binding FECs Settings tab, the following page will appear. Figure 11-22 MPLS QoS Settings (Edit, Binding FECs Settings) Window The fields that can be configured are described below: Parameter IP Mask Description Enter the FEC IP address here. Use this feature to apply an MPLS QoS policy to FECs. The QoS policy will be applied to all MPLS packets of the FEC. A FEC can only be bound to at most one policy. Enter the FEC subnet mask here. 610