D-Link DGS-3630 User Manual 1 - Page 52

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description • L2VPN - Specifies that the Switch prefer the Layer 2 VPN mode. Click the Apply button to accept the changes made. NOTE: When the SRM mode was modified and the Switch was rebooted, the table size will be changed. If the number of static entries saved in the startup configuration exceeds the number of static entries in the new table size, the exceeded number of entries will be removed. NOTE: When Switches are physically stacked, ensure that all Switches in the stack are configured to use the same SRM mode. SRM Prefer Mode This window is used to view the SRM preferred mode settings. The entries in this table are fixed values indicating the maximum number of entries allowed per feature. To view the following window, click System > SRM > SRM Prefer Mode, as shown below: Figure 3-38 SRM Prefer Mode Window The fields that can be configured are described below: Parameter SRM Prefer Mode Description Select the SRM prefer mode that will be used in the display here. Options to choose from are LAN, IP, and L2VPN. Click the Find button to generate the display based on the selections made. 40