D-Link DGS-3630 User Manual 1 - Page 672

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to RCP, as shown below: Figure 15-20 Configuration Backup to RCP Window The fields that can be configured are described below: Parameter Unit RCP Server IP User Name VRF Name Source File Destination File Description Select the Switch unit that will be used for this configuration here. Enter the RCP server IP address here. Enter the user name used for the RCP connection here. This name can be up to 32 characters long. Enter the name of the VRF instance here. This name can be up to 12 characters long. Enter the source filename and path of the configuration file located on the Switch here. This field can be up to 64 characters long. Select the runningconfig option to back up the running configuration file from the Switch. Select the startup-config option to back up the start-up configuration file from the Switch. Enter the destination path and location where the configuration file should be stored on the RCP server. This field can be up to 64 characters long. Click the Backup button to initiate the configuration file backup. Configuration Backup to SFTP This window is used to initiate a configuration file backup to an SFTP server. To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to SFTP, as shown below: Figure 15-21 Configuration Backup to SFTP Window 660