D-Link DGS-3630 User Manual 1 - Page 137

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Management > D-Link Discovery Protocol, as shown below: Figure 4-103 D-Link Discovery Protocol Window The fields that can be configured in D-Link Discovery Protocol are described below: Parameter D-Link Discovery Protocol State Report Timer Description Select to globally enable or disable the DDP feature here. Select the report timer value here. This is used to configure interval between two consecutive DDP report messages. Options to choose from are 30, 60, 90, 120 seconds, or Never. Selecting Never instructs the Switch to stop sending report messages. Click the Apply button to accept the changes made. The fields that can be configured in DDP Port Settings are described below: Parameter Unit From Port - To Port State Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select to enable or disable the DDP feature on the specified port(s) here. Click the Apply button to accept the changes made. SMTP Settings This window is used to display and configure the Simple Mail Transfer Protocol (SMTP) settings. 125