D-Link DGS-3630 User Manual 1 - Page 158

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After click the Edit button, the following page will appear. This is a dynamic page that will change when a different VLAN Mode is selected. When Access was selected as the VLAN Mode, the following page will appear. Figure 5-21 VLAN Interface (Access) Window The fields that can be configured are described below: Parameter VLAN Mode Acceptable Frame Ingress Checking VLAN ID Clone From Port - To Port Description Select the VLAN mode option here. Options to choose from are Access, Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk Promiscuous, and Trunk Secondary. Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. Select to enable or disable the ingress checking function. Enter the VLAN ID used for this configuration here. This value must be between 1 and 4094. Select this option to enable the clone feature. Select the range of ports that will be used in the clone feature here. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. When Hybrid was selected as the VLAN Mode, the following page will appear. Figure 5-22 VLAN Interface (Hybrid) Window 146