D-Link DGS-3630 User Manual 1 - Page 246

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. ARP Force Aging IP Address This window is used to manually age-out ARP entries, that are assigned as next-hop route entries, by specifying the VRF and IP address of the entry. To view the following window, click L3 Features > ARP > ARP Force Aging IP Address, as shown below: Figure 6-4 ARP Force Aging IP Address Window The fields that can be configured are described below: Parameter VRF Name IP Address Description Enter the name of the VRF instance here. This name can be up to 12 characters long. Enter the IP address of the ARP entry that will be forced to age-out here. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Proxy ARP This window is used to display and configure the Proxy ARP settings. The Proxy ARP feature will allow the Switch to reply to ARP requests destined for another device by faking its identity (IP and MAC Address) as the original ARP responder. Therefore, the Switch can then route packets to the intended destination without configuring static routing or a default gateway. The host, usually a Layer 3 Switch, will respond to packets destined for another device. To view the following window, click L3 Features > ARP > Proxy ARP, as shown below: Figure 6-5 Proxy ARP Window 234