D-Link DGS-3630 User Manual 1 - Page 669

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from SFTP, as shown below: Figure 15-16 Configuration Restore from SFTP Window The fields that can be configured are described below: Parameter Unit SFTP Server IP User Name Password VRF Name Source File Destination File Replace Description Select the Switch unit that will be used for this configuration here. Enter the IPv4 address of the SFTP server here. Enter the user name used for the SFTP connection here. This name can be up to 32 characters long. Enter the password used for the SFTP connection here. This password can be up to 15 characters long. Enter the name of the VRF instance here. This name can be up to 12 characters long. Enter the source filename and path of the configuration file located on the SFTP server here. This field can be up to 64 characters long. Enter the destination path and location where the configuration file should be stored on the Switch. This field can be up to 64 characters long. Select the running-config option to restore and overwrite the running configuration file on the Switch. Select the startup-config option to restore and overwrite the startup configuration file on the Switch. Select this option to replace the configuration file on the Switch with this one. Click the Restore button to initiate the configuration restore. Configuration Backup to HTTP This window is used to initiate a configuration file backup to a local PC using HTTP. To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to HTTP, as shown below: Figure 15-17 Configuration Backup to HTTP Window 657