D-Link DGS-3630 User Manual 1 - Page 93

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide DHCP Relay Information Option Format Settings This window is used to display and configure the DHCP information format. To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Information Option Format Settings, as shown below: Figure 4-55 DHCP Relay Information Option Format Settings Window The fields that can be configured in DHCP Relay Information Option Format Global are described below: Parameter Information Format Remote ID Description Select the DHCP information remote ID sub-option. Options to choose from are: • Default - Select to use the Switch's system MAC address as the remote ID. • User Define - Select to use a user-defined remote ID. Enter the userdefined string with the maximum of 32 characters in the text box. • Vendor2 - Select to use vendor 2 as the remote ID. • Expert UDF - Select to use the expert UDF remote ID. Select the stand- alone unit format after this selection here. Information Format Circuit ID Select the DHCP information circuit ID sub-option. Options to choose from are: • Default - Select to use the default circuit ID sub-option. • User Define - Select to use a user-defined circuit ID. Enter the user- defined string with the maximum of 32 characters in the text box. • Vendor1 - Select to use vendor 1 as the circuit ID. • Expert UDF - Select to use the expert UDF circuit ID. Select the stand- alone unit format after this selection here. Click the Apply button to accept the changes made. The fields that can be configured in DHCP Relay Information Option Format Global are described below: Parameter Unit From Port - To Port Format Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Specifies that the expert UDF format will be used. 81