D-Link DGS-3630 User Manual 1 - Page 526

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Dynamic ARP Inspection ARP Access List This window is used to display and configure the dynamic ARP inspection settings. To view the following window, click Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP Access List, as shown below: Figure 9-44 ARP Access List Window The fields that can be configured are described below: Parameter ARP Access List Name Description Enter the ARP access list name used here. This name can be up to 32 characters long. Click the Add button to add a new entry based on the information entered. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specified entry. After clicking the Edit button, the following window will appear. Figure 9-45 ARP Access List (Edit) Window The fields that can be configured are described below: Parameter Action IP Sender IP Description Select the action that will be taken here. Options to choose from are Permit and Deny. Select the type of sender IP address that will be used here. Options to choose from are Any, Host, and IP with Mask. After selecting the Host or IP with Mask options as the type of IP, enter the sender IP address used here. 514