D-Link DGS-3630 User Manual 1 - Page 662

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Unit SFTP Server IP User Name Password VRF Name Source File Destination File Description Select the Switch unit that will be used for this configuration here. Enter the IPv4 address of the SFTP server here. Enter the user name used for the SFTP connection here. This name can be up to 32 characters long. Enter the password used for the SFTP connection here. This password can be up to 15 characters long. Enter the name of the VRF instance here. This name can be up to 12 characters long. Enter the source filename and path of the firmware file located on the SFTP server here. This field can be up to 64 characters long. Enter the destination path and location where the new firmware should be stored on the Switch. This field can be up to 64 characters long. Click the Upgrade button to initiate the firmware upgrade. Firmware Backup to HTTP This window is used to initiate a firmware backup to a local PC using HTTP. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to HTTP, as shown below: Figure 15-7 Firmware Backup to HTTP Window The fields that can be configured are described below: Parameter Unit Source File Description Select the Switch unit that will be used for this configuration here. Enter the source filename and path of the firmware file located on the Switch here. This field can be up to 64 characters long. Click the Backup button to initiate the firmware backup. Firmware Backup to TFTP This window is used to initiate a firmware backup to a TFTP server. 650