D-Link DGS-3630 User Manual 1 - Page 217

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide After clicking the Modify or Edit button in MLD Snooping Settings window, the following window will appear. Figure 5-84 MLD Snooping Settings (Modify, Edit) Window The fields that can be configured are described below: Parameter Description Minimum Version Select the minimum version of MLD hosts that is allowed on the VLAN. Options to choose from are 1 and 2. Fast Leave Select this option to enable or disable the MLD snooping Fast Leave function. If enabled, the membership is immediately removed when the system receives the MLD done message from the last member. Report Suppression Select this option to enable or disable the report suppression. Suppression Time Enter the interval of suppressing duplicate MLD reports or leaves. The range is from 1 to 300. Proxy Reporting Select this option to enable or disable the proxy-reporting function. Source Address Enter the source IP of proxy reporting. This is available when Enabled is selected in Proxy Reporting. Mrouter Port Learning Select this option to enable or disable Mrouter port learning. Querier State Select this option to enable or disable the querier state. Query Version Select the general query packet version sent by the MLD snooping querier. Options to choose from are 1, and 2. Query Interval Enter the interval at which the MLD snooping querier sends MLD general query messages periodically. The range is from 1 to 31744. Max Response Time Enter the maximum response time, in seconds, advertised in MLD snooping queries. The range is from 1 to 25. Robustness Value Enter the robustness variable used in MLD snooping. The range is from 1 to 7. Last Listener Query Interval Enter the interval at which the MLD snooping querier sends MLD group-specific or group-source-specific (channel) query messages. The range is from 1 to 25. 205