Dell PowerConnect 3348 User's Guide - Page 117
Warning, Notice, Informational, Debug, Global Log Parameters, Console, RAM Logs, Log File, Enable
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
- Warning-Indicates the lowest level of a device warning. The device is functioning, but an operational problem has occurred. - Notice-Provides the network administrators with device information. - Informational-Provides device information. - Debug-Provides detailed information about the log. If a Debug error occurs, contact Dell Online Technical Support (www.support.dell.com). NOTE: When a severity level is selected, all severity level choices above the selection are selected automatically. The Global Log Parameters page also contains check boxes that correspond to a distinct logging system: • Console-Indicates the minimum severity level from which logs are sent to the console. • RAM Logs-Indicates the minimum severity level from which logs are sent to the Log File kept in RAM (Cache). • Log File-Indicates the minimum severity level from which logs are sent to the Log File kept in FLASH memory. Enabling Logs: 1 Open the Global Log Parameters page. 2 Select Enable in the Logging drop-down list. 3 Select the log type and log severity in the Global Log Parameters check boxes. 4 Click Apply Changes. The log settings are saved, and the device is updated. Enabling Logs Using CLI Commands The following table summarizes the equivalent CLI commands for viewing fields displayed in the Global Log Parameters page. CLI Command logging on logging ip-address [port port] [severity level] [facility facility] [description text] logging console level Description Enables error message logging. Logs messages to a syslog server. For a list of the Severity levels, see "Log Severity Levels". Limits messages logged to the console based on severity. Configuring System Infor mation 117