Dell PowerConnect 3348 User's Guide - Page 221
LAG Configuration, displayed in
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
The following message displays: console# sh interfaces status port-channel 1 ch Type Duplex Speed Neg Flow Link Back Control State Pressure ch1 100M Full 100 Disabled Off Up Disabled The following table summarizes the equivalent CLI commands for configuring LAGs as displayed in the LAG Configuration page. CLI Command interface port-channel portchannel-number channel-group portchannel-number mode {on | auto} show interfaces port-channel [port-channel-number] Description Creates a port-channel and enters portchannel configuration mode. Associates a port with a port-channel. Displays Port-channel information (which ports are members of a Port-channel, and whether they are currently active or not). The following is an example of the CLI commands: Console (config)# interface ethernet 1/e5 Console (config-if)# channel-group 1 mode on Console (config-if)# exit Console (config-if)# exit Console # show interfaces port-channel Channel Port 1Active 1/e5, 2/e2 Inactive 3/e3 2Active 1/e2 3Inactive 3/e8 Configuring Switch Infor mation 221