Dell PowerConnect 3348 User's Guide - Page 65
Remote Management Access - web interface
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
SYSTEM RESET Remote Management Access To allow remote device management (Telnet, Web etc.) perform the following: 1 Enter the command enable at the console to enter the Privileged EXEC screen mode as follows: console>enable console# 2 Connect the management station (PC) to the device via one of the Ethernet ports (or via a network connected to the device) using a CAT5 Cable, to port e1 in this example. Ensure (on the ASCII terminal) that the interface status changed to "up" and that the STP status is forwarding (after 30 seconds): console>enable Console# 01-Jan-2000 01:43:03 %LINK-I-Up: Vlan 1 01-Jan-2000 01:43:03 %LINK-I-Up: 1/e1 01-Jan-2000 01:43:34 %STP-I-PORTSTATUS: Port 1/e1: STP status Forwarding 3 Enter the command configure at the console to enter the Configuration screen mode as follows: console> enable console# configure console(config)# Configuring the PowerConnect 3324/3348 Switch 65