Dell PowerConnect 3348 User's Guide - Page 171
Defining Traps, SNMP Community, Show All, Community Table, Remove, Apply Changes, SNMP Trap Settings
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Community Table Page Deleting Communities: 1 Open the SNMP Community page. 2 Click Show All. The Community Table page opens. 3 Select a community from the Community Table. 4 Check the Remove check box. 5 Click Apply Changes. The community entry is deleted, and the device is updated. Configuring Communities Using CLI Commands The following table summarizes the equivalent CLI commands for viewing fields displayed in the SNMP Community page. CLI Command snmp-server community string [ro | rw | su] [ip-address] show snmp Description Sets up the community access string to permit access to SNMP protocol. Checks the status of SNMP communications. The following is an example of the CLI commands: Console (config)# snmp-server community public su 0.0.0.0 Defining Traps From the SNMP Trap Settings page, the user can enable or disable the device to send SNMP traps or notifications. To open the SNMP Trap Settings page: • Click System > SNMP > Traps in the Tree View. The SNMP Trap Settings page opens. Configuring System Infor mation 171