Dell PowerConnect 3348 User's Guide - Page 147

CLI Command management access-list name permit [ethernet interfacenumber | vlan vlan-id | portchannel number] [service service] permit ip-source ip-address [mask mask | prefix-length] [ethernet interface-number | vlan vlan-id | port-channel number] [service service] deny [ethernet interfacenumber | vlan vlan-id | portchannel number] [service service] deny ip-source ip-address [mask mask | prefix-length] [ethernet interface-number | vlan vlan-id | port-channel number] [service service] management access-class {consoleonly | name} show management access-list [name] show management access-class Description Defines an access-list for management, and enters the access-list context for configuration. Sets port permitting conditions for the management access list. Sets port permitting conditions for the management access list, and the selected management method. Sets port denying conditions for the management access list, and the selected management method. Sets port denying conditions for the management access list, and the selected management method. Defines which access-list is used as the active management connections. Displays the active management accesslists. Displays information about management access-class. The following is an example of the CLI commands: Console (config)# management access-list mlist Console (config-macl)# permit ethernet 1/e1 Console (config-macl)# permit ethernet 2/e9 Console (config-macl)# deny ethernet 1/e2 Console (config-macl)# deny ethernet 2/e10 Console (config-macl)# exit Configuring System Infor mation 147