Dell PowerConnect 3348 User's Guide - Page 245
STP Port Settings, Select a Port, Enable, Disable, Fast Link, Forwarding State, Port State, Blocking
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 245 highlights
STP Port Settings Page The STP Port Settings page contains the following fields: • Select a Port-Indicates the port for which STP statistics are displayed. • STP-Enables STP on the port. The possible field values are: - Enable-Enables STP on the port. - Disable-Disables STP on the port. • Fast Link-Enables Fast Link mode for the port. If Fast Link mode is enabled for a port, the port is automatically placed in the Forwarding State when the port link is up. Fast Link mode optimizes the time it takes for the STP protocol to converge (STP convergence can take 30-60 seconds in large networks). • Port State-Indicates the current STP state of a port. If enabled, the Port State determines what forwarding action is taken on traffic. The possible field values are: - Disabled-Indicates the port link is currently down. - Blocking-The port is currently blocked and cannot be used to forward traffic or learn MAC addresses. - Listening-The port is currently in the listening mode. The port cannot forward traffic nor can it learn MAC addresses. Configuring Switch Infor mation 245