Dell PowerConnect 3348 User's Guide - Page 84
Downloading the Software Via the PowerConnect 3324/3348 Dell, OpenManage Switch Administrator
View all Dell PowerConnect 3348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
www.dell.com | support.dell.com 6 Enter console# reload. The following message displays: This command will reset the whole system and disconnect your current session. Do you want to continue (y/n) [n] ? 7 Enter Y. The device reboots. 8 Repeat step 3 to verify which Image files are active. 9 Enter console# copy image unit://2/image. The following is an example of the information which displays: console# copy image unit://2/image Unit 2: Erased image-2 Copy: 2883576 bytes copied in 00:01:35 [hh:mm:ss] console# 01-Jan-2000 01:08:59 %COPY-W-TRAP: The copy operation was completed successfully 10 Enter console# boot system unit {unit number} image-{file name}. 11 Repeat step 9 for each Stacking unit. 12 Enter console# reload. The following message displays: This command will reset the whole system and disconnect your current session. Do you want to continue (y/n) [n] ? 13 Enter Y. The device reboots. 14 Repeat steps 2 and 3 to ensure the correct Image file is active. Downloading the Software Via the PowerConnect 3324/3348 Dell OpenManage Switch Administrator For instructions on downloading the software via the Dell OpenManage Switch Administrator, see "Managing Files". 84 C o n f i g u r i n g t h e Po w e r C o n n e c t 3 3 2 4 / 3 3 4 8 S w i t c h